Samsung Washer Error Code DC
Door Error
Severity
DIY Difficulty
Est. Cost
$0 - $150
Est. Time
20 min
What Does DC Mean?
Samsung washer error DC means door error. This is a moderate issue with a DIY difficulty of 2/5. Most repairs cost between $0 and $150.
Common Causes
Sensor malfunction
This is a common and usually minor cause of the DC error on Samsung washers.
Minor blockage
This is a common and usually minor cause of the DC error on Samsung washers.
Connection issue
This is a common and usually minor cause of the DC error on Samsung washers.
Step-by-Step Fix
Power cycle the appliance
Unplug your Samsung washer for 60 seconds, then plug it back in. This clears temporary errors and resets the control board.
Check for obvious issues
Inspect your washer for any visible problems such as loose connections, blockages, or unusual sounds. Many DC errors on Samsung units are caused by simple issues.
Run a diagnostic cycle
Many Samsung washers have a built-in diagnostic mode. Check your user manual for the specific key combination to enter diagnostics on your model.
Test related components
Based on the DC error meaning (Door Error), check the specific components involved. Use a multimeter to test for continuity if you are comfortable with electrical testing.
✅ Click each step to mark as completed (0/4 done)