Kenmore Washer Error Code F20
No Water Supply
Severity
DIY Difficulty
Est. Cost
$0 - $50
Est. Time
15 min
What Does F20 Mean?
Kenmore washer error F20 means no water supply. This is a moderate issue with a DIY difficulty of 1/5. Most repairs cost between $0 and $50.
Common Causes
Sensor malfunction
This is a common and usually minor cause of the F20 error on Kenmore washers.
Minor blockage
This is a common and usually minor cause of the F20 error on Kenmore washers.
Connection issue
This is a common and usually minor cause of the F20 error on Kenmore washers.
Step-by-Step Fix
Power cycle the appliance
Unplug your Kenmore washer for 60 seconds, then plug it back in. This clears temporary errors and resets the control board.
Check for obvious issues
Inspect your washer for any visible problems such as loose connections, blockages, or unusual sounds. Many F20 errors on Kenmore units are caused by simple issues.
Run a diagnostic cycle
Many Kenmore washers have a built-in diagnostic mode. Check your user manual for the specific key combination to enter diagnostics on your model.
Test related components
Based on the F20 error meaning (No Water Supply), check the specific components involved. Use a multimeter to test for continuity if you are comfortable with electrical testing.
✅ Click each step to mark as completed (0/4 done)