Samsung Over-the-Range Microwave Turntable Motor
Complete guide with costs, step-by-step instructions, and repair options
Turntable Motor on a Samsung Over-the-Range Microwave typically costs $15–$30 DIY, $60–$100 at a third-party shop, or $80–$150 through Samsung. The repair is rated Easy (3/10) and takes about 20 minutes. At 23% of appliance value, this repair is usually worth doing.
DIY Cost
$15-$30
Time Required
~20 min
Difficulty
Easy (3/10)
Official Warranty
1 year
Cost Comparison
DIY Repair
$15-$30
Parts only — you do the labor
Third-Party Shop
$60-$100
Parts + professional labor
Official Repair
$80-$150
Manufacturer service center
Tools & Parts Needed (DIY)
Always use the correct tools for your specific model. Using wrong-sized screwdrivers can strip screws and cause additional damage.
Step-by-Step DIY Guide
Follow these steps carefully. Take photos at each stage for reference during reassembly.
Unplug the microwave
Disconnect your Samsung Over-the-Range Microwave from power.
Access the turntable motor
The motor is under the microwave floor. Remove the bottom panel screws, or for countertop models, flip the unit over and remove the base plate.
Replace the motor
Disconnect the wire connector from the old motor. Remove the mounting screws, swap in the new motor, and reconnect the wire harness.
Test rotation
Replace the plate and roller ring. Plug in, place a heavy item on the turntable, and run for 60 seconds. The plate should rotate smoothly without stalling.
Is It Worth Repairing?
Your Samsung Over-the-Range Microwave is currently worth approximately $350. A turntable motor through a third-party shop costs $60-$100, which is 23% of the device value.
This repair is worth it. The cost is well below 50% of the device value, making repair the financially smart choice.
Frequently Asked Questions
How much does turntable motor cost for a Samsung Over-the-Range Microwave?
DIY parts run $15–$30. An independent shop charges $60–$100 including labor. Official Samsung service costs $80–$150. The DIY route saves the most but you take on the risk of further damage; shops are the middle ground; official is the safest if warranty matters.
Is replacing the microwave turntable motor worth doing on an older microwave?
Probably not if the microwave is over 5–7 years old. Turntable motors are $15–25 parts and 15-minute jobs, but if other parts are aging (door switches, magnetron, control panel), you're putting good money into a tired appliance. On a newer microwave (under 5 years), absolutely worth it — the motor is one of the cheapest things to fail and a simple swap.
How long does turntable motor take and how hard is it?
Plan on about 20 minutes for the work itself, rated Easy (3/10). First-time DIY attempts typically take 50–100% longer because of unfamiliar parts and tools. At this difficulty most owners can do it with a basic toolkit and a video guide.
What warranty options come with each repair path?
DIY: no labor warranty — the parts carry their own (usually 30–90 days from the supplier). Independent shops typically offer 90 days on parts and labor. Samsung official service comes with 1 year. If keeping the manufacturer warranty intact matters to you, the official route is the only one that does that — third-party work generally voids any remaining manufacturer coverage.
Is repairing my Samsung Over-the-Range Microwave worth it vs replacing it?
Your Samsung Over-the-Range Microwave is worth roughly $350. A shop turntable motor costs $60–$100, which is about 23% of device value. At this ratio, repair is the clear winner — you save more than 65% vs replacement.
External Resources
Trusted third-party resources for this repair: